Sunday, May 29, 2016
Wednesday, May 25, 2016
Stampin' Up! Floral Wings 2 of 3
Supplies:
·
Whisper White Cardstock
Whisper White Cardstock
·
Elegant Eggplant Cardstock
Elegant Eggplant Cardstock
·
Tip Top Taupe Cardstock
Tip Top Taupe Cardstock
·
Elegant Eggplant Ink
Elegant Eggplant Ink
·
Cucumber Crush Ink
Cucumber Crush Ink
·
Tip Top Taupe Ink
Tip Top Taupe Ink
·
Snail
Snail
·
Rhinestones
Rhinestones
·
Glue
Glue
·
A2 Envelope
A2 Envelope
·
Bold Butterfly Framelits
Bold Butterfly Framelits
·
Big Shot
Big Shot
·
Floral Wings stamp
set
Floral Wings stamp
set
Dimensions:
·
Tip Top Taupe cut at 4 ¼” x 11” scored at 5 1/2”
Tip Top Taupe cut at 4 ¼” x 11” scored at 5 1/2”
·
WW cut at 4” x 5 ¼”
WW cut at 4” x 5 ¼”
·
WW cut at 3 ¾” x 5”
WW cut at 3 ¾” x 5”
·
Scrap WW – for butterfly
Scrap WW – for butterfly
·
Elegant Eggplant cut at 4” x 5 ¼”
Elegant Eggplant cut at 4” x 5 ¼”
Steps:
1.
Stamp flowers and vine vertically onto the
middle of the smaller piece of WW and to the left hand side of the larger piece
of WW and to the envelope front and back (horizontally)
Stamp flowers and vine vertically onto the
middle of the smaller piece of WW and to the left hand side of the larger piece
of WW and to the envelope front and back (horizontally)
2.
Attach the larger piece of WW to the inside of
the card base
Attach the larger piece of WW to the inside of
the card base
3.
Attach the Elegant Eggplant to the front of the
card base using snail
Attach the Elegant Eggplant to the front of the
card base using snail
4.
Attach the smaller piece of WW to the elegant
eggplant
Attach the smaller piece of WW to the elegant
eggplant
5.
Stamp sentiment onto the card front
Stamp sentiment onto the card front
6.
Stamp the butterfly, flowers, and leaves on the
scrap WW
Stamp the butterfly, flowers, and leaves on the
scrap WW
7.
Die cut the butterfly using framelits and
bigshot
Die cut the butterfly using framelits and
bigshot
8.
Adhere butterfly body to front of card using
glue
Adhere butterfly body to front of card using
glue
9.
Raise wings up
Raise wings up
10.
Adhere rhinestones as desired
Adhere rhinestones as desired
Stampin' Up! Floral Wings - Beautiful Hostess set
Supplies:
·
Whisper White Cardstock
Whisper White Cardstock
·
Delightful Dijon Cardstock
Delightful Dijon Cardstock
·
Tip Top Taupe Cardstock
Tip Top Taupe Cardstock
·
English Garden DSP
English Garden DSP
·
Cucumber Crush Ink
Cucumber Crush Ink
·
Tip Top Taupe Ink
Tip Top Taupe Ink
·
Delightful Dijon Ink
Delightful Dijon Ink
·
Snail
Snail
·
Rhinestones
Rhinestones
·
A2 Envelope
A2 Envelope
·
Bold Butterfly Framelits
Bold Butterfly Framelits
·
Big Shot
Big Shot
·
Floral Wings stamp
set
Floral Wings stamp
set
Dimensions:
·
Delightful Dijon cut at 4 ¼” x 11” scored at 5
1/2”
Delightful Dijon cut at 4 ¼” x 11” scored at 5
1/2”
·
Tip Top Taupe cut at 3 ¼” x 4 ½”
Tip Top Taupe cut at 3 ¼” x 4 ½”
·
WW cut at 4” x 5 ¼”
WW cut at 4” x 5 ¼”
·
WW cut at 3” x 4 ¼”
WW cut at 3” x 4 ¼”
·
Scrap WW – for butterfly
Scrap WW – for butterfly
Steps:
1.
Stamp flowers and vine vertically onto eash side
of the smaller piece of WW and horizontally on the bottom of the larger piece
of WW
Stamp flowers and vine vertically onto eash side
of the smaller piece of WW and horizontally on the bottom of the larger piece
of WW
2.
Attach the larger piece of WW to the inside of
the card base
Attach the larger piece of WW to the inside of
the card base
3.
Attach the DSP to the front of the card base
using snail
Attach the DSP to the front of the card base
using snail
4.
Attach the smaller piece of WW to the Tip Top
Taupe
Attach the smaller piece of WW to the Tip Top
Taupe
5.
Attach the Tip Top Taupe to the DSP
Attach the Tip Top Taupe to the DSP
6.
Stamp sentiment onto the card front
Stamp sentiment onto the card front
7.
Stamp the butterfly, flowers, and leaves on the
scrap WW
Stamp the butterfly, flowers, and leaves on the
scrap WW
8.
Die cut the butterfly using framelits and
bigshot
Die cut the butterfly using framelits and
bigshot
9.
Adhere butterfly body to front of card using
glue
Adhere butterfly body to front of card using
glue
10.
Raise wings up
Raise wings up
11.
Adhere rhinestones as desired
Adhere rhinestones as desired
Tuesday, May 24, 2016
Sunday, May 22, 2016
Birthday Blooms Card Class To Go
Hi everyone! I am now offering a class using the Birthday Blooms stamp set that was in the Occassions Catalog but will stick around for the 2016 Annual Catalog as well! This includes five different Birthday Blooms card designs for a total of 10 cars (two of each design) and a BONUS Project!
You will have all of the paper and embellishments delivered to your door cut and ready for you to make your cards!
This is what you can look forward to finding in your package:Additional Items you will need to complete the class:
- Paper cut and ready to go neatly sorted by project
- Embellishments for all 10 cards also sorted by project
- Envelopes for all 10 cards
- Framelits and Thinlits will be cut and ready to be assembled as needed
- Step by Step instruction and video of each project
- You can access the class at any time - 24/7!
Deadline to Order and Pay For Kit: June 15, 2016!
- Stamps: Birthday Blooms (140658 $19 - acrylic)
- Ink: Basic Black, Mint Macaron, Flirty Flamingo, Pool Party, Dapper Denim, Delightful Dijon, Blushing Bride
- Tools: Bone folder, Scissors
- Embellishments: Wink of Stella
- Adhesive: Snail, dimensionals, glue dots, tear and tape
To order, please send an email to ttscraps@sbcglobal.net and let me know if you need the stamp set or not and I will send an invoice via paypal. (Note: if not specified a $33 invoice will be sent)
Cost without Stamp Set:
$33
Price Includes Shipping
US Orders Only
Cost With Stamp Set:
$55
Includes shipping
US Orders Only
No refunds or exchanges
Tuesday, May 17, 2016
Stampin' Up! Swirly Bird Card with Dapper Denim!
Supplies:
·
Whisper White Cardstock
Whisper White Cardstock
·
Dapper Denim CS
Dapper Denim CS
·
Dapper Denim Ink
Dapper Denim Ink
·
Emerald Envy Ink
Emerald Envy Ink
·
Endless Thanks stamp set
Endless Thanks stamp set
·
Swirly Bird stamp set
Swirly Bird stamp set
·
Botanical Builder Framelits
Botanical Builder Framelits
·
Snail
Snail
·
Dimensionals
Dimensionals
Dimensions:
·
Dapper Denim cut at 5 ½” x 8” scored at 2 1/8”
on each side
Dapper Denim cut at 5 ½” x 8” scored at 2 1/8”
on each side
·
WW CS cut at 5 ¼” x 4”
WW CS cut at 5 ¼” x 4”
·
WW CS cut at 2” x 5” (Need two pieces)
WW CS cut at 2” x 5” (Need two pieces)
·
Scrap WW to stamp sentiment and bird
Scrap WW to stamp sentiment and bird
Steps:
1.
Stamp flowers on one piece of the smaller WW CS
Stamp flowers on one piece of the smaller WW CS
2.
Stamp sentiment and bird on scrap WW and fussy
cut
Stamp sentiment and bird on scrap WW and fussy
cut
3.
Adhere Stamped WW to the left panel of the card
base
Adhere Stamped WW to the left panel of the card
base
4.
Adhere sentiment using dimensionals
Adhere sentiment using dimensionals
5.
Stamp flower on 2nd strip of WW – I
used the stamp off technique for the large flower and then stamped straight on
the swirls
Stamp flower on 2nd strip of WW – I
used the stamp off technique for the large flower and then stamped straight on
the swirls
6.
Stamp the stem and leaves using emerald envy
Stamp the stem and leaves using emerald envy
7.
Adhere flowered strip to the right side panel
Adhere flowered strip to the right side panel
8.
Stamp a little birdie on the bottom corner of
the large piece of WW CS
Stamp a little birdie on the bottom corner of
the large piece of WW CS
9.
Adhere the WW to the inside of the card
Adhere the WW to the inside of the card
10.
Enjoy! J
Enjoy! J
Saturday, May 14, 2016
Stampin' Up! Pop of Paradise!
Supplies:
·
Whisper White Cardstock
Whisper White Cardstock
·
Flirty Flamingo CS
Flirty Flamingo CS
·
Emerald Envy CS
Emerald Envy CS
·
Flirty Flamingo Ink
Flirty Flamingo Ink
·
Pop of Paradise stamp set
Pop of Paradise stamp set
·
Botanical Builder Framelits
Botanical Builder Framelits
·
Snail
Snail
·
Glue
Glue
·
Rhinestones
Rhinestones
Dimensions:
·
Whisper White (WW) cut at 4 ¼” x 11” scored
at 5½”
Whisper White (WW) cut at 4 ¼” x 11” scored
at 5½”
·
Emerald Envy large scrap
Emerald Envy large scrap
·
Flirty Flamingo large scrap
Flirty Flamingo large scrap
Steps:
1.
Stamp flamingo onto center of card base
Stamp flamingo onto center of card base
2.
Die cut greenery using Emerald Envy
Die cut greenery using Emerald Envy
3.
Die cut flowers using Flirty Flamingo
Die cut flowers using Flirty Flamingo
4.
Adhere diecuts to card base surrounding flamingo
– use oth glue and snail as needed
Adhere diecuts to card base surrounding flamingo
– use oth glue and snail as needed
5.
Add rhinestones as desired
Add rhinestones as desired
Friday, May 13, 2016
Stampin' Up - Painter's Palette!
Shaker Card!!! Oh, this was so fun to make and is so very cute!!! :)
It's really not that hard - just takes a little time - you should try it!! :)
Need supplies? Shop with me at TT.Scraps
Supplies:
·
Whisper White Cardstock
Whisper White Cardstock
·
Flirty Flamingo CS
Flirty Flamingo CS
·
Emerald Envy CS
Emerald Envy CS
·
Playful Palette DSP
Playful Palette DSP
·
Painter’s Palette stamp set
Painter’s Palette stamp set
·
Sprinkles Punch
Sprinkles Punch
·
Layering Squares Framelits
Layering Squares Framelits
·
Window Sheet
Window Sheet
·
Black Archival Ink
Black Archival Ink
·
Snail
Snail
·
Glue
Glue
·
Foam Strips
Foam Strips
·
Rhinestones
Rhinestones
Dimensions:
·
Whisper White (WW) cut at 4 ¼” x 11” scored
at 5½”
Whisper White (WW) cut at 4 ¼” x 11” scored
at 5½”
·
WW scrap to stamp the palette
WW scrap to stamp the palette
·
DSP cut at 3” x 4 ¼”
DSP cut at 3” x 4 ¼”
·
Emerald Envy cut at 2 ½” x 4”
Emerald Envy cut at 2 ½” x 4”
·
DSP cut at 2 ¼” x 2 ¼”
DSP cut at 2 ¼” x 2 ¼”
·
DSP cut at 2 ½” square with a 2” square cut out
of center
DSP cut at 2 ½” square with a 2” square cut out
of center
·
Flirty Flamingo cut with scalloped square
framelit at 2 ¼” square with 1 7/8” square cut out of center
Flirty Flamingo cut with scalloped square
framelit at 2 ¼” square with 1 7/8” square cut out of center
·
Window sheet cut at 2 ½” square
Window sheet cut at 2 ½” square
·
Scrap emerald envy SC for sprinkles
Scrap emerald envy SC for sprinkles
Steps:
1.
Stamp artist palette onto scrap WW and fussy cut
Stamp artist palette onto scrap WW and fussy cut
2.
Stamp sentiment onto Emerald Envy
Stamp sentiment onto Emerald Envy
3.
Adhere large DSP to card base
Adhere large DSP to card base
4.
Adhere Emerald
Envy onto DSP
Adhere Emerald
Envy onto DSP
5.
Adhere palette to card base
Adhere palette to card base
6.
Glue window sheet to DSP of same size with
window cut out to make a frame
Glue window sheet to DSP of same size with
window cut out to make a frame
7.
Glue scalloped flirty flamingo CS to the frame
Glue scalloped flirty flamingo CS to the frame
8.
Adhere the 2 ¼” DSP to the card base on top of
the palette
Adhere the 2 ¼” DSP to the card base on top of
the palette
9.
Frame the base with foam strips
Frame the base with foam strips
10.
Punch sprinkles out with emerald envy and put
inside the foamed area
Punch sprinkles out with emerald envy and put
inside the foamed area
11.
Adhere window sheet frame to the foam strips
Adhere window sheet frame to the foam strips
12.
Add rhinestones as desired
Add rhinestones as desired
Thursday, May 12, 2016
Stampin' Up - Love You Lots Hedgehogs!! :)
I LOVE these hedgies!!! So darned cute!!! :) :) :)
Supplies:
·
Whisper White Cardstock
Whisper White Cardstock
·
Flirty Flamingo CS
Flirty Flamingo CS
·
Playful Palette DSP
Playful Palette DSP
·
Love You Lots stamp set
Love You Lots stamp set
·
Flirty Flamingo ribbon
Flirty Flamingo ribbon
·
Tip Top Taupe Ink
Tip Top Taupe Ink
·
Black Archival Ink
Black Archival Ink
·
Snail
Snail
·
Glue dot
Glue dot
·
Dimensionals
Dimensionals
Dimensions:
·
Whisper White (WW) cut at 4 ¼” x 11” scored
at 5½”
Whisper White (WW) cut at 4 ¼” x 11” scored
at 5½”
·
WW cut at 3 ¾” x 4 ¾”
WW cut at 3 ¾” x 4 ¾”
·
DSP cut at 4” x 5 ¼”
DSP cut at 4” x 5 ¼”
·
Flirty Flamingo CS cut at 4 ¼” x 3”
Flirty Flamingo CS cut at 4 ¼” x 3”
·
Ribbon cut at approx. 6 inches (need two)
Ribbon cut at approx. 6 inches (need two)
Steps:
1.
Stamp sweet hedgies and sentiment onto WW
Stamp sweet hedgies and sentiment onto WW
2.
Adhere Flirty
Flamingo onto DSP
Adhere Flirty
Flamingo onto DSP
3.
Andere WW to Flirty Flamingo using dimensionals
Andere WW to Flirty Flamingo using dimensionals
4.
Wrap 1 ribbon around the top three layers
Wrap 1 ribbon around the top three layers
5.
Adhere DSP onto card base
Adhere DSP onto card base
6.
Tie ribbon into bow and attach with glue dot
Tie ribbon into bow and attach with glue dot
Wednesday, May 11, 2016
Sunday, May 8, 2016
Wednesday, May 4, 2016
Stampin' Up! - Cupcake Party Stamp Set #2
I REALLY like this stamp set! So cute and so many things you can do with it! This card is really easy to make and it's a fun one to give! :)
Supplies:
- Card base - Blushing Bride cut at 4 1/4 x 11; scored at 5 1/2
- Crumb cake cut at 4 1/4 x 3
- WW cut at 2 x 4 1/4
- Scrap of whisper white
- Blushing Bride Thick Bakers Thread - about 24"
- Snail adhesive
- Dimensionals
- Cupcake punch
- Cupcake Party stamp set
- Circle edge punch (non SU!)
- Ink in Blushing bride, mint macaron, and tip top taupe
Steps:
- Stamp 3 cupcake toppings onto the scrap WW
- Punch out the toppings
- Stamp 3 cupcake bases on the larger piece of we
- attach frosting to base using stampin' dimensionals
- Punch the edge border on the crumb cake
- attach WW to the crumb cake
- Attach the baker's thread wrapping around both crumb and ww and tieing in bow
- Attach to the card base
- Stamp sentiment onto card base
- Admire your work :)
Monday, May 2, 2016
Stampin' Up! - Cupcake Party Stamp Set #1
Supplies:
- Card base = Whisper White cut at 4 1/4 x 11; scored at 5 1/2
- English Garden DSP cut at 4 x 5 1/4Scrap of whisper white
- Scrap of night of navy
- 10" ribbon
- Night of Navy Ink
- Snail adhesive
- Dimensionals
- Cupcake punch
- Cupcake Party stamp set
- Circle Thinlets
- Big Shot
Steps:
- Attach ribbon to DSP using snail
- Attach DSP to card base using snail
- Using the circle framelits, die cut circles using whisper white and night of navy cs
- Stamp the cupcake unto the scrap whisper white cs
- Punch out the cupcake using the cupcake punch
- Adhere the cupcake onto the whisper white circle using dimensionals (single layer for base of cupcake - double layer for frosting)
- Adhere the Whisper White circle to the Night of Navy circle
- Adhere the Night of Navy circle to the card
- Admire your work :)
Subscribe to:
Posts (Atom)